2000-60PA Differential Pressure Gauge – Ideal for HVAC and Cleanrooms

1. What is 2000-60PA? Overview of the Dwyer Differential Pressure Gauge
The 2000-60PA model is part of the renowned Magnehelic® series from Dwyer Instruments (USA), designed to measure extremely low differential pressure. It is perfectly suited for environments that require high sensitivity and precision, such as:

• Industrial HVAC systems

• GMP and ISO 14644 cleanrooms

• Laboratories and hospitals

• Fume hoods, AHUs, and FCUs

With a measuring unit in Pascals (Pa) – a standard in modern engineering – the 2000-60PA is especially ideal for the Asian market, including Vietnam.

2. Key Technical Specifications of the Dwyer 2000-60PA
(Specifications can be added as a table or listed from a datasheet if needed.)

3. Practical Applications of the 2000-60PA

1. HVAC Systems (Heating – Ventilation – Air Conditioning):

• Measures pressure drop across filters in AHU/FCU

• Monitors duct static pressure to adjust fan operation

• Tracks central HVAC system performance

2. Cleanrooms:

• Measures pressure differential between rooms to maintain directional airflow (positive/negative pressure)

• Alerts when pressure deviates from GMP standards to maintain environmental quality

3. Fume Hoods:

• Controls airflow to ensure operator safety

• Continuously monitors for pressure leaks or drops

4. Other Applications:

• Airflow management in hospital operating rooms and isolation rooms

• Pharmaceutical, electronics, and food production facilities

4. Key Advantages of the Dwyer 2000-60PA

• Ultra-sensitive low-pressure measurement
  With a range of 0–60Pa, it can detect very small pressure differences – beyond the capability of many electronic sensors.

• No power required
  Operates entirely mechanically using Dwyer’s Magnehelic® magnetic principle – no electricity needed, safe from electrical faults, and easy to use.

• Easy to install and maintain
  Industrial-standard design can be mounted directly on a wall, control panel, or inside a technical cabinet. Standard pressure port connections for easy replacement and installation.

• High durability
  Cast aluminum housing, clear polycarbonate lens, and sealed mechanical internals ensure stable operation in harsh industrial environments.

5. Installation Guide for the 2000-60PA Differential Pressure Gauge

• Step 1: Choose installation location
  Install on a flat, low-vibration surface.
  Place it close to the pressure source to reduce signal loss.

• Step 2: Connect pressure tubing
  HIGH (+) port: connect to higher pressure point
  LOW (–) port: connect to lower pressure point
  Use short, flexible, pressure-rated tubing. Avoid bends or kinks.

• Step 3: Mount the gauge
  Use a mounting bracket or screws (provided by Dwyer).
  Ensure the gauge is level to avoid measurement error.

• Step 4: Check operation
  Observe needle movement and current pressure value.
  Test functionality by applying a light test pressure (manual blow or test pump).

6. Purchase the Genuine Dwyer 2000-60PA from DLK
DLK is the official distributor of Dwyer in Vietnam, offering:

• Genuine products with CO and CQ certification

• Accurate technical consultation – help selecting the correct pressure range

• Fast delivery – nationwide installation support

• Multiple equivalent models in stock: 2000-125PA, 2000-300MM, 2000-500MM...

Looking for a reliable and accurate pressure monitoring solution for your HVAC system, cleanroom, or production facility?
Let DLK support your project with the 2000-60PA – the optimal solution for modern environments.