Genuine Dwyer Magnehelic® 2000-2KPA Differential Pressure Gage | DLK

When your HVAC systems or controlled cleanroom environments require accurate differential pressure monitoring across a wider range without sacrificing mechanical durability, the 2000-2KPA model within the Dwyer Series 2000 Magnehelic® family stands out as the ultimate choice. This line of differential pressure gages is highly trusted by mechanical and electrical (M&E) engineers globally due to its straightforward yet highly effective engineering design, requiring no complex or costly field maintenance routines.

Key Outstanding Features of the 2000-2KPA Model

The 2000-2KPA model utilizes the exact same legendary Magnehelic® technology found throughout the rest of the standard Series 2000 portfolio. By pairing a responsive elastomer diaphragm with a frictionless magnetic movement mechanism, the gauge indicates real-time differential pressure deviations instantaneously without demanding any external electrical power source or battery backing.

With its dedicated 0 to 2 kPa measurement scale, this specific model is perfectly tailored for intermediate-level differential pressure applications, providing an excellent operational balance between extreme sensitivity and a wide dynamic measurement scale.

Technical Specifications

Onsite Installation and Commissioning Protocols

Because the 2000-2KPA pressure gage is a high-precision mechanical instrument, its field installation and calibration sequence is straightforward. However, site technicians must adhere strictly to the proper mounting orientations and handling practices to preserve its rated reading accuracy.

1. Mounting Orientation Enforcement: Always select an installation position where the gauge face remains strictly vertical. This is the factory-calibrated reference position required to guarantee the stated $\pm 2\%$ full-scale accuracy. If an application forces a horizontal or inclined mounting angle, the pointer must be re-zeroed at that specific physical angle before operation.

2. Port Identification: Locate and identify the High-pressure (High) and Low-pressure (Low) ports on the gauge housing, which are clearly embossed on the casing or detailed in the technical manual.

3. Pneumatic Tubing Integration: Run appropriate pressure signal tubing (such as flexible plastic hoses or small-bore copper tubes) from the target measuring points inside the duct or equipment into the corresponding High and Low ports. Ensure zero leakage at all termination fittings.

4. Zero-Point Calibration: Prior to running the air handling system, inspect the dial pointer. If it deviates from zero, use the front-facing zero-adjustment screw to bring the pointer exactly to the "0" mark while both pressure ports remain open to ambient atmosphere.

5. System Commissioning: Pressurize the network and observe the movement of the pointer across the dial face to record the actual, real-time differential pressure value.

6. Preventative Maintenance Loop: Periodically clean the front cover plate and verify the zero-point calibration (recommended every 6 to 12 months) to maintain long-term asset accuracy, especially in high-dust industrial environments.

Important Safety Note: Do not install the instrument in zones exposed to severe structural vibration or ambient temperatures outside the rated range of 20 to 140°F (-6.67 to 60°C). Exceeding these limits can degrade reading accuracy and lead to premature failure of the internal mechanical diaphragm.

Core Field Applications

• Monitoring filter resistance and pressure drops to detect blockage across AHU/PAU filter banks.

• Controlling differential room pressure boundaries between isolation sectors in cleanrooms and biological labs.

• Tracking real-time fan efficiencies, blower performance, and static velocity profiles inside factory ductworks.

• Integrating into building stairwell pressurization systems and automated smoke management infrastructure.

Why Source the Dwyer 2000-2KPA from DLK?

• 100% Factory-Original Dwyer Hardware: Directly imported with complete, fully traceable shipping records and import compliance documentation.

• Professional Engineering Consultations: Our engineering experts ensure you select the exact measurement scale for your building codes, preventing mismatched instrument ratings.

• Comprehensive Submittal Packages: Instantly access catalogs, operations manuals, and technical datasheets required for project closeout handbooks.

• Transparent Service Commitments: Structured factory warranty claims backed by rapid post-sales technical field assistance.

Contact DLK for Engineering Support & Tender Quotations

Are you provisioning genuine USA-made Dwyer Magnehelic® 2000-2KPA differential pressure gages complete with full project compliance certifications and fast nationwide shipping? Connect with DLK TRADING SERVICE COMPANY LIMITED today to review your project schematics and secure a formal commercial quotation.

• 24/7 Engineering Support Hotline: 0937972339

• Commercial Sales Division: 0783683479

• Corporate Email Portal: info@dlk.com.vn

• Headquarters Address: 111/7, Vuon Lai Street, Phu Tho Hoa Ward, Tan Phu District, Ho Chi Minh City, Vietnam

• View Product Details & Online Ordering: [https://dlk.com.vn/bo-do-ap-suat-2000-2kpa.html](https://dlk.com.vn/bo-do-ap-suat-2000-2kpa.html)